Geschäftskunden Kundenprogramme
Vor Ort
Merkzettel Warenkorb
Produktbild: Scanning Force Microscopy of Polymers

Scanning Force Microscopy of Polymers

Aus der Reihe Springer Laboratory

Fr. 112.00

inkl. gesetzl. MwSt., Versandkostenfrei

Beschreibung

Produktdetails

Einband

Taschenbuch

Erscheinungsdatum

23.08.2016

Verlag

Springer Berlin

Seitenzahl

248

Maße (L/B/H)

23.5/15.5/1.5 cm

Gewicht

409 g

Auflage

Softcover reprint of the original 1st edition 2010

Sprache

Englisch

ISBN

978-3-662-51749-9

Beschreibung

Rezension

From the reviews:

“Atomic force microscopy (AFM) can be used to image polymer surfaces over a broad range from several nanometers to more than 100 micrometer scan sizes. … one of the most engaging and practical books ever on the topic of AFMs. It provides the reader with insightful methods for imaging polymer surfaces at elevated temperatures and in other situations. … would be suitable for both industrial researchers and academic personnel working in the laboratory. … Anyone who uses an AFM will find this book extremely useful.” (IEEE Electrical Insulation Magazine, Vol. 27 (4), July/August, 2011)

Produktdetails

Einband

Taschenbuch

Erscheinungsdatum

23.08.2016

Verlag

Springer Berlin

Seitenzahl

248

Maße (L/B/H)

23.5/15.5/1.5 cm

Gewicht

409 g

Auflage

Softcover reprint of the original 1st edition 2010

Sprache

Englisch

ISBN

978-3-662-51749-9

Herstelleradresse

Springer-Verlag KG
Sachsenplatz 4-6
1201 Wien
AT

Email: GPSR Kontakt

Noch keine Bewertungen vorhanden

Verfassen Sie die erste Bewertung zu diesem Artikel

Helfen Sie anderen Kundinnen und Kunden durch Ihre Meinung.

Kundinnen und Kunden meinen

Bewertungen (0)
  • Produktbild: Scanning Force Microscopy of Polymers
  • Introduction (Vancso)

    Part I: Principles: Theory and Practice

    1. Physical Principles of Scanning Probe Microscopy Imaging (Vancso)

    2. Atomic Force Microscopy in Practice (Schönherr)

    2.1 Assembling of AFM's for operation
    2.1.1 Scanned sample AFM (contact mode)
    2.1.2 Stand alone AFM (contact mode)
    2.1.3 Intermittent contact (tapping) mode
    2.2 Practical issues of AFM operation
    2.2.1 AFM cantilevers, tips and their characteristics
    2.2.2 Sample preparation
    2.2.3 Choice of operation modes and suitable imaging environments
    2.2.4 Tip handling modification procedures
    2.2.5 Calibration issues
    2.2.6 General guidelines for AFM laboratories
    2.2.7 Data evaluation
    2.2.8 Typical AFM artefacts
    2.3 References / further reading

    Part II. Case Studies: Macromolecules, Polymer Morphology and Polymer Surface Properties by AFM

    3 Visualization of Macromolecules and Polymer Morphology

    3.1 Structural Hierarchy in Polymers (Vancso)

    3.2 Single Component Systems (Schönherr)
    3.2.1 Visualization of Single Macromolecules
    3.2.1.1 Visualization of Poly(ethylene imine) (PEI) Adsorbed on Mica
    3.2.1.2 Visualization of Poly(amidoamine) Dendrimers Adsorbed on Mica
    3.2.2 Lattice Visualization of Crystallized Homopolymers
    3.2.2.1 Lattice Visualization of Poly(tetrafluoro ethylene) (PTFE) by CM-AFM
    3.2.2.2 Lattice Visualization of Poly(oxy methylene) (POM) by CM-AFM
    3.2.3 Amorphous Polymers
    3.2.3.1 Imaging of the Surface Morphology of Poly(ethylene terephthalate) (PET) by TM-AFM
    3.2.3.2 Imaging of Dewetted Perfluoropolyether Lubricant on Hard Disc Surfaces by TM-AFM
    3.2.4 Lamellar Crystals (Crystallized from Solution or Melt)
    3.2.4.1 Solution-Grown Lamellae of POM and PE by CM-AFM
    3.2.4.2 Lamellae inIsotactic Polypropylene (iPP) by TM-AFM
    3.2.4.3 Lamellae in Spin-Coated Films of Poly(ethylene oxide) (PEO) by TM- AFM
    3.2.5 Extended Chain Crystals and Shish-Kebob Structures
    3.2.5.1 CM-AFM on Extended Chain Crystals of Cold-Drawn PET
    3.2.5.2 TM-AFM on Shish-Kebob Morphology in Drawn Polyethylene Copolymers
    3.2.6 Hedrites and Spherulites
    3.2.6.1 Sample Preparation: Melt Crystallization Followed by Etching
    3.2.6.2 CM-AFM on Thin Films of Isotactic Polypropylene (iPP) - a-iPP
    3.2.7 References

    3.3 Biopolymers (Schönherr)
    3.3.1 Imaging of Biological and Biopolymer Specimens under Liquid
    3.3.1.1 AFM under liquid
    3.3.1.2 Mounting the liquid cell (dry sample)
    3.3.1.3 CM-AFM operation under liquid
    3.3.1.4 TM-AFM operation under liquid
    3.3.2 Hand-on examples
    3.3.2.1 Visualization of Adsorbed Lipid Vesicles and Bilayers
    3.3.2.2 Visualization of Polymerizable Lipid Bilayers
    3.3.2.3 Visualization of the Tobacco Mosaic Virus
    3.3.2.4 Cellulose Fibers in Pulp
    3.3.2.5 Cellulose Microcrystals
    3.3.2.6 Polysaccharides: Xanthan gum
    3.3.2.7 Collagen
    3.3.2.8 Crystallized Protein Layers : Streptavidin
    3.3.2.9 Lambda DNA
    3.3.2.10 Biocompatible Polymers
    3.3.3 References

    3.4 Multi Component Systems (Schönherr)
    3.4.1 Materials Contrast in AFM Imaging of Multi Component Systems
    3.4.2 Block Copolymers
    3.4.2.1 Visualization of Microphase Separated Morphology of Films of Polystyrene-b-polyisoprene-b-polystyrene
    3.4.2.2 Visualization of Microphase Separated Morphology of Hydrolyzed Films of polystyrene-b-poly(tert-butyl acrylate)
    3.4.3 Polymer Blends
    3.4.3.1 Identification of Phases in Blend of PMMA and PB
    3.4.3.2 Identification of Phases in Blends of Impact Polymers by FMM
    3.4.4 Filled Polymer Systems
    3.4.4.1 Distribution of