KI-Beratung Beta

  • Produktbild: Electromagnetic Interference and Electromagnetic Compatibility
  • Produktbild: Electromagnetic Interference and Electromagnetic Compatibility

Electromagnetic Interference and Electromagnetic Compatibility Principles, Design, Simulation, and Applications

Fr. 272.00

inkl. gesetzl. MwSt., Versandkostenfrei


Beschreibung

Electromagnetic compatibility is concerned with the generation, transmission, and reception of electromagnetic energy. The book discusses about the basic principles of electromagnetic interference (EMI) and electromagnetic compatibility (EMC) including causes, events, and mitigation of issues. The design...

Beschreibung

Electromagnetic compatibility is concerned with the generation, transmission, and reception of electromagnetic energy. The book discusses about the basic principles of electromagnetic interference (EMI) and electromagnetic compatibility (EMC) including causes, events, and mitigation of issues. The design procedures for EMI filter, the types of filters, and filter implementation methods are explained. The simulation of printed circuit board designs using different software and a step-by-step method is discussed in detail. This book addresses the gap between theory and practice using case studies with design, experiments, and supporting analysis.

Features:

  • Discusses about the basic principles of EMI/EMC including causes and events
  • Makes readers understand the problems in different applications because of EMI/EMC and the reducing methods
  • Explores real-world case studies with code to provide hands-on experience
  • Reviews design strategies for mitigation of noise
  • Includes MATLAB, PSPICE, and ADS simulations for designing EMI Filter circuits.

The book is aimed at graduate students and researchers in electromagnetics, circuit and systems, and electrical engineering.

Produktdetails

Einband

Gebundene Ausgabe

Erscheinungsdatum

02.10.2023

Abbildungen

441 SW-Abb., 165 SW-Fotos, 276 SW-Zeichn.

Verlag Taylor & Francis

Produktdetails

Einband

Gebundene Ausgabe

Erscheinungsdatum

02.10.2023

Abbildungen

441 SW-Abb., 165 SW-Fotos, 276 SW-Zeichn.

Verlag Taylor & Francis
Seitenzahl

472

Maße (L/B/H)

26/18.3/3 cm

Gewicht

1075 g

Sprache

Englisch

ISBN

978-1-03-241976-3

Herstelleradresse

Libri GmbH
Europaallee 1
36244 Bad Hersfeld
DE

Email: gpsr@libri.de

Noch keine Bewertungen vorhanden

Verfassen Sie die erste Bewertung zu diesem Artikel

Helfen Sie anderen Kundinnen und Kunden durch Ihre Meinung.

Kundinnen und Kunden meinen

Bewertungen (0)

Die Leseprobe wird geladen.
  • Produktbild: Electromagnetic Interference and Electromagnetic Compatibility
  • Produktbild: Electromagnetic Interference and Electromagnetic Compatibility
  • Chapter 1. Introduction to Electromagnetic Interference and Electromagnetic Compatibility. 1.1 Electromagnetic Spectrum - Time Domain - Frequency Domain. 1.2 Spectrum Analysis: Time Domain and Frequency Domain. 1.3 EMI Effects on Humans and Other Electronic Appliances. 1.4 Basics of Differential Mode current and common mode Current. 1.5 EMI ISSUES and Mitigation. 1.6 Full-wave simulation techniques. 1.7 Equivalent series resistance and equivalent series inductance. 1.8 Impedance and its Effect on Electromagnetic Interference. 1.9 Materials. 1.10 EMC Testing. 1.11 EMC Standards. References. Chapter 2. Electromagnetic Interference Events. 2.1 EMI Measurement Techniques. 2.2 Radiated Emissions. 2.3 Radiated Emissions Checklist. 2.4 Radiated Emission Testing. 2.5 Test Setup for Radiated Emission Measurement. 2.6 Conducted Emission. 2.7 Conducted Emissions Checklist. 2.8 EMI Conducted Terminology. 2.9 Decible. 2.10 Standardized Measurements of Conducted EMI. 2.11 Conducted Emission Testing. 2.12 Measurement Selectivity. 2.13 Measuring Detectors. 2.14 Parameters Associated with EMI Measurement Techniques. 2.15 Troubleshooting at Your Facility. 2.16 Susceptibility Models for Wires and PCB Lands. 2.17 Antenna Design and Its Performance. 2.18 Conducted Susceptibility. 2.19 Troubleshooting at Your Facility. 2.20 Conducted Susceptibility Testing. 2.21 Circuit Topology. 2.22 Spread Spectrum Technique. 2.23 Spread Spectrum Clock. 2.24 Soft Switching Techniques. 2.25 Hard Switched and Soft Switched Power Converters. 2.26 Reduction in Printed Circuit Board (PCB). References. Chapter 3. EMI Filter. 3.1 EMI Filter Source Impedance of Various Power Lines. 3.2 Skin Effect. 3.3 Differences among Power Line Measurements. 3.4 EMC Filter Design. 3.5 Adaptation Principle of EMI Filters. 3.6 Electronic Filter Parameters. 3.7 Filter Configurations. 3.8 Operating Principle. 3.9 Insertion Loss. 3.10 Steps in the Design of a Power Line EMI Filter. 3.11 Differential Mode (DM) vs Common Mode (CM) Interference Currents. 3.12 Differential-Mode Design Goals. 3.13 Differential-Mode Filter Input Impedance. 3.14 Differential-Mode Filter Output Impedance. 3.15 Input and Output Impedance for a DC Filter. 3.16 Common-Mode Design Goals. 3.17 Estimation of the Common-Mode Source Impedance. 3.18 Methods of Reducing the Inductor Value due to High Current. 3.19 Design Criteria. 3.20 Component nonidealities. 3.21 High-frequency differential-mode filtering. 3.22 Ferrite bead selection. 3.23 Filter damping. 3.24 Filter Requirements. 3.25 Filter Selection. 3.26 Typical EMI Filters. 3.27 Filter Components. 3.28 Filter Components- the Inductor. References. Chapter 4. EMI/EMC Design for Printed Circuit Boards. 4.1 Controlling Emi Sources - Unintentional Sources. 4.2 Intentional Current Spectrum. 4.3 Trace Current for Decoupling Analysis. 4.4 Internal Differential Signal Lines. 4.5 I/O Differential Signal Lines. 4.6 Crosstalk Analysis. 4.7 Printed Circuit Board Layout. 4.8 Pc Board Stack-Up. 4.9 Multi Layer Board. 4.10 Six Layer Board. 4.11 Four Layer Board. 4.12 One and Two Layer Board. 4.13 Component Placement. 4.14 Isolation. 4.15 Power Distribution for Two Layer Board. 4.16 Layout for Susceptibility. References. Chapter 5. EMI and EMC Simulation Softwares. 5.1 EM Work. 5.2 EM Work Products. 5.3 A Transformer Software and Calculation. 5.4 A Motor Software and a Calculator. 5.5 About HF WORKS. 5.6 Versatile High Frequency and High-Speed Tool. 5.7 User Friendly Interface and Embedded Learning Materials. 5.8 HFWORKS Add-Ins. 5.9 About Motor Wizard. 5.10 Features and Capabilities. 5.11 Motor Wizard Results. 5.12 EM Works 2d. 5.13 Features and Capabilities. 5.14 Applications. 5.15 Power Si. 5.16 Traditional Si Simulation. 5.17 Power - Aware Solution. 5.18 Power - Aware Solution Available in Sigrity Technology. 5.19 Features. 5.20 Benefits. 5.21 CST Studio Suite. 5.22 Design Environment. 5.23 Simulation. 5.24 Applications. 5.25 Benefits. 5.26 Applications of Momentum 3d Planar Em